RouterBOARD RB952Ui-5ac2nD con fuente

RB952Ui-5ac2nD-US - MikroTik hAP Access Point (built-in antennas)  Dual Band  , • Dual chain wireless 2.4GHz • Single chain wireless 5GHz • 650MHz CPU • 64MB of RAM • Five x 10/100Mbps Ethernet ports • Passive PoE output on port 5 • USB port for 3G/4G modem • 2.4GHz frequency range: 2412 - 2462MHz • 5GHz frequency range: 5170 - 5250MHz and 5725 - 5835MHz

Nivel de stock: Disponible
Cod: LFSBC-RB952Ui-5ac2nD
$ 1696
u$s 94
Comprar

Financiación

 

hAP ac lite

The hAP ac lite is a Dual-concurrent Access Point, that provides Wifi coverage for 2.4GHz and 5GHz frequencies at the same time.

Unit is equipped with a 650MHz CPU, 64MB RAM, five 10/100Mbps Ethernet ports (PoE output on port #5), dual-chain 802.11b/g/n 2.4GHz wireless, single chain 802.11ac 5GHz wireless, USB port for 3G/4G modem and a RouterOS L4 license.

We have two versions available - RB952Ui-5ac2nD (International) and RB952Ui-5ac2nD-US (USA). RB952Ui-5ac2nD-US (USA) is factory locked for 2412-2462MHz, 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed. RB952Ui-5ac2nD (International) supports 2412-2484MHz and 5150MHz - 5875MHz range.

Product specifications

Details
Product code RB952Ui-5ac2nD
CPU nominal frequency 650 MHz
CPU core count 1
Size of RAM 64 MB
10/100 Ethernet ports 5
Wireless chip model QCA9887
Wireless standards 802.11a/n/ac
Secondary wireless chip model QCA9531
Secondary wireless standards 802.11b/g/n
Number of USB ports 1
Power Jack 1
Supported input voltage 10 V - 30 V
PoE in Yes
PoE out Yes
Dimensions 113 x 89 x 28mm
Operating System RouterOS
Tested ambient temperature -30 + 70 C
License level 4
Antenna gain DBI 2
CPU QCA9531
Max Power consumption 8W
USB slot type USB type A
Number of chains 1
Storage type FLASH
Storage size 16 MB
Suggested price $49.95

Wireless specifications

5 GHz
  Transmit power (dBm) Receive Sensitivity Transmit power (mW)
6MBit/s 23 -93 200
54MBit/s 20 -75 100
MCS0 23 -93 200
MCS7 19 -71 79
MCS9 16 -63 40
2.4 GHz
  Transmit power (dBm) Receive Sensitivity Transmit power (mW)
1MBit/s 22 -96 158
11MBit/s 22 -89 158
6MBit/s 20 -93 100
54MBit/s 18 -74 63
MCS0 20 -93 100
MCS7 16 -71 40

wireless parameters may be limited in software, depending on your local regulatory limitations

Included parts

Performance test results

RB952Ui-5ac2nD QCA9531 (650Mhz) 100M all port test
Mode Configuration 1518 byte 512 byte 64 byte
kpps Mbps kpps Mbps kpps Mbps
Bridging none (fast path) 40.6 493.0 117.4 480.9 217.0 111.1
Bridging 25 bridge filter rules 40.6 493.0 70.1 287.1 70.9 36.3
Routing none (fast path) 40.6 493.0 117.4 480.9 200.8 102.8
Routing 25 simple queues 40.6 493.0 79.6 326.0 90.8 46.5
Routing 25 ip filter rules 40.6 493.0 42.2 172.8 43.2 22.1
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results

 

Formulario de contacto