FAN COOLER THERM FRIO ADVANCED
Features
- Heat-pipe Direct Touch Technology, Supports 230W Cooling Performance
- Dual 13cm Over-clocking Fan, PWM controllable with 800~2,000 RPM Speed
- Universal Socket Compatibility & Accessory Package
Detailed Feature
Heat-pipe Direct Touch Technology, Supports 230W Cooling Performance
- 5 x Ø6 mm heat-pipes direct touch CPU surface increasing heat conductivity.
- High density Aluminum fins allow larger surface area to quick dissipate heat.
- Premium thermal grease maximizes heat transfer from the CPU into the cooler base for rapid dissipation.
Dual 13cm Over-clocking Fan, PWM function with 800~2,100 RPM Speed
- A pair of high performance red bladed fans generate excellent cooling power.
- Tool-less fan installation provides great convenience for users.
- Vibration-absorbent gaskets decrease noise during operation.
- Fan speed at the lowest RPM provides good performance and very low noise.
Universal Socket Compatibility & Accessory Package
- All-in-one back-plate design, offers support for all Intel and AMD platforms
- Universal socket support : Intel: LGA 2011, LGA1366, LGA1156, LGA1155, LGA775AMD: FM1, AM3+, AM3, AM2+, AM2
Dimension
Intel Motherboard Installation
|
Step 1 |
Step 2 |
 |
 |
|
Step One: Insert the four long screws through the back-plate into the four holes on the motherboard and secure them with the four plastic spacers.
|
Step Two: Put the two Intel mounting bars along the four long screws and secure them with four nuts.
|
|
Step 3 |
Step 4 |
 |
 |
|
Step Three: Remove two fans from the cooler before installation.
|
Step Four: Securing the two T-mounting bars to the base of cooler by short screws.
|
|
Step 5 |
Step 6 |
 |
 |
|
Step Five: Applying a thin layer of thermal grease
|
Step Six: Place the assembled heat-sink onto the CPU and tighten each fixing bolts evenly.
|
|
Step 7 |
Step 8 |
 |
 |
|
Step Seven: Place a fan to the fan duct at a slanted angle and push the top of fan until hearing a “click” sound. Repeat steps for the other fan.
|
Step Eight: Connect the 4-pin wire to the motherboard’s CPU fan connector. Installation is done.
|
AMD Motherboard Installation
|
Step 1 |
Step 2 |
 |
 |
|
Step One: Insert the four long screws through the back-plate into the four holes on the motherboard and secure them with the four plastic spacers.
|
Step Two: Put the two AMD mounting bars along the four long screws and secure them with the four nuts.
|
|
Step 3 |
Step 4 |
 |
 |
|
Step Three: Remove two fans from the cooler before installation.
|
Step Four: Securing the two T-mounting bars to the base of cooler by short screws.
|
|
Step 5 |
Step 6 |
 |
 |
|
Step Five: Applying a thin layer of thermal grease
|
Step Six: Place the assembled heat-sink onto the CPU and tighten each fixing bolts evenly.
|
|
Step 7 |
Step 8 |
 |
 |
|
Step Seven: Place a fan to the fan duct at a slanted angle and push the top of fan until hearing a “click” sound. Repeat steps for the other fan.
|
Step Eight: Connect the 4-pin wire to the motherboard’s CPU fan connector. Installation is done.
|
Airflow Chart
|
P/N |
CLP0596 |
|
Dimension |
130.6(L) X 122(W) x 159.2(H) mm |
|
Material |
Aluminum Fins
Aluminum Base |
|
Heatpipe |
6mm x 5PCS |
|
Weight |
954g |
|
Rated Voltage |
12V |
|
Start Voltage |
6V |
|
Rated Current |
0.5A |
|
Power Consumption |
6W (Max) |
|
Fan Speed |
800~2000RPM |
|
Max. Air Flow |
88.77CFM |
|
Max. Air Pressure |
2.7 mmH2O |
|
Noise |
21~44 dBA |
|
Connector |
4 |
|
Life Expectancy |
50,000 Hours |
|
Compatibility |
Intel
LGA 2011
LGA 1366
Core i7
LGA 1155/1156/1150
Core i7 / Core i5 / Corei3
LGA 775
Core 2 Extreme / Core 2 Quad / Core 2 Duo / Pentium D / Pentium 4/Pentium / Celeron D / Celeron
AMD
FM1
A-series
AM3+ / AM3
Phenom II / Athlon II / Athlon / Sempron series
AM2+ / AM2
Phenom II / Phenom / Athlon / Sempron series |
