airGateway Pro, Installer

UBIQUITI AG-PRO-INS

Wi-Fi Provisioning Gateway
The durable airGateway Installer should be in every WIsP installers toolbox. the aG-PRO-INs makes installing consumer premises equipment (CPe) easier and more efficient. Position, provision, and configure the CPE at the
point of installation using a tablet or smartphone.

Mobile Device-Friendly Installation
The AG-PRO-INS provides dual-band Wi-Fi connectivity to mobile devices or laptops without Ethernet capability.
This allows you to use a tablet or smartphone to access the CPE’s web UI during installation so provisioning and final adjustments may be made at the point of installation


Optional Power by Battery (NOT INCLUDED)
The AG-PRO-INS may be powered by an optional mobile power pack so provisioning may be completed before the PoE connection is established.
The power pack must be 5V, 2A minimum in order to power the AG-PRO-INS and the CPE, and have a male micro-USB Type B connector.


Dimensions
47 x 80 x 34 mm (1.86 x 3.15 x 1.34")

Processor
Atheros MIPS 74KC, 560MHz

Memory
32 MB DDR2

Buttons
(1) Reset airGateway
(1) Reset External airMAX Device

Networking Interfaces
(3) 10/100 Ethernet Ports, Dual-Band Wi-Fi

Wi-Fi Frequency
2.4 / 5 GHz

Wi-Fi Standards
802.11 a/b/g/n

Power Method
PoE Adapter, 15-24V (Not Included)
USB Mobile Battery Pack, 5V, 2A (Not Included)

LED
White, Blue

Operating Temperature
-30 to 70° C (-22 to 158° F)

Operating Humidity
5 to 95% Noncondensing


Frequency: 2.4 , 5 GHz
Antenna: (1) Internal 
Range 50 m 
Power Method PoE, USB
Networking Interface Wi-Fi, Ethernet