Router Huawei AR6121E 2 Puertos GE combo WAN 1 Puerto 10GE(SFP+) WAN 8 Puertos 8 GE LAN Puerto 1 GE combo LAN 2 Puertos USB 2.0, 2 SIC

$1370348
u$s1372
IVA incluído.
Nivel de stock: Disponible
Cod: SBAR6121E
Agregar al Carrito

Contacta para recibir más información

Tel: 4372-9595 WhatsApp +54 9 11 6 745-9595 
Hasta 12 cuotas sin interés Ver promociones bancarias
Envíos a todo el país Más información
Pick up en tienda Ver ubicación

Router Huawei AR6121E 2 Puertos GE combo WAN  1 Puerto 10GE(SFP+) WAN 8 Puertos  8 GE LAN Puerto 1 GE combo LAN  2 Puertos USB 2.0, 2 SIC

 

Router Huawei AR6121E 

 

 

Overview

Table 3-211 Basic information about the AR6121E
Item Details
Description AR6121E, 2*GE combo WAN, 1*10GE(SFP+) WAN, 8*GE LAN, 1*GE combo LAN, 2*USB, 2*SIC
Part Number 02353TBH
Model AR6121E
First supported version V300R019C13
Remarks When configuring cards, ensure that the total power of the configured cards does not exceed 27 W or contact technical support engineers to obtain more suggestions.

Appearance

Figure 3-135 Appearance of the AR6121E

Components

Figure 3-136 Components of the AR6121E

1. Product model silkscreen

2. LAN interfaces: eight GE electrical interfaces

3. WAN interfaces: two GE combo interfaces

4. Two SIC slots

5. Ground point

6. AC power jack

7. Jack for power cable locking strap

NOTE:

Insert a power cable locking strap in this jack to secure the power cable.

8. RESET button

NOTE:
This button is used to reset the router.
  • In an empty configuration scenario, ensure that the router has no console port input, and has no user login routers. If the Reset button is pressed and held for at least 5 seconds, you will access the registration query center of Huawei devices and obtain the cloud management platform address of routers for plug-and-play deployment.
  • In the configured scenario, hold down the button for at least 5 seconds to restore the factory settings.
  • To reset the router, hold down the button for less than 5 seconds.
Resetting the router will interrupt services. Exercise caution when deciding to press this button.

9. LAN interfaces: GE combo interface

10. WAN interface: one 10GE optical interface

11. USB interface 3.0 (host)

12. USB interface 2.0 (host)

13. Console interface

-

-

Slot Layout

Figure 3-137 Slot Layout of the AR6121E
Table 3-212 Slots on the AR6121E
Slot Type Slot ID Slot Direction Remarks
SIC 1 Transverse Slot 1 and slot 2 are combined into new slot 2 (WSIC).
SIC 2 Transverse Slot 1 and slot 2 are combined into new slot 2 (WSIC).

Ports

Table 3-213 Ports on the AR6121E
Port Connector Type Description Available Components
Console interface RJ45

The console interface can connect to an operation terminal for onsite configuration.

  • Standards compliance: RS232
  • Working mode: duplex Universal Asynchronous Receiver/Transmitter (UART)
  • Data equipment type: Data Circuit-terminating Equipment (DCE)

Console cable

LAN interfaces: eight GE electrical interfaces RJ45

A GE electrical interface (10/100/1000 Mbit/s auto-sensing) transmits and receives services at 10 Mbit/s, 100 Mbit/s, or 1000 Mbit/s.

  • Standards compliance: IEEE802.3, IEEE802.3u, and IEEE802.3ab
  • Working mode: full-duplex (10/100/1000 Mbit/s auto-sensing)
  • Maximum distance: 100 m
NOTE:

GE0 is a management interface and is used for web-based management and email-based deployment.

All LAN-side GE interfaces can be configured as WAN-side interfaces.

Ethernet cable

LAN interfaces: GE combo interface

GE electrical interface: RJ45

GE optical port: LC/PC

A GE combo interface consists of an optical Ethernet interface and an electrical Ethernet interface on the panel. The two interfaces have only one internal forwarding interface. The electrical and optical interfaces are multiplexed, and only either of them can work at a time. When either of the Ethernet interfaces is working, the other interface is shut down.

  • The GE electrical interface (10/100/1000 Mbit/s auto-sensing) transmits and receives services at 10 Mbit/s, 100 Mbit/s, or 1000 Mbit/s.
  • The GE optical interface (100/1000 Mbit/s auto-sensing) transmits and receives services at 100 Mbit/s or 1000 Mbit/s.
NOTE:

By default, a combo interface works in auto mode and automatically works as an optical or electrical interface.

GE8 is the BootROM management network port on a device and is used to upgrade the device software through the BootROM menu.

  • GE electrical port: Ethernet cable
  • GE optical interface: optical module

The following optical modules are supported:

FE SFP&eSFP Optical Modules

GE eSFP Optical Modules

GPON&EPON Optical Modules

GE SFP Copper Modules

WAN interfaces: two GE combo interfaces

GE electrical interface: RJ45

GE optical port: LC/PC

A GE combo interface consists of an optical Ethernet interface and an electrical Ethernet interface on the panel. The two interfaces have only one internal forwarding interface. The electrical and optical interfaces are multiplexed, and only either of them can work at a time. When either of the Ethernet interfaces is working, the other interface is shut down.

  • The GE electrical interface (10/100/1000 Mbit/s auto-sensing) transmits and receives services at 10 Mbit/s, 100 Mbit/s, or 1000 Mbit/s.
  • The GE optical interface (100/1000 Mbit/s auto-sensing) transmits and receives services at 100 Mbit/s or 1000 Mbit/s.
NOTE:

By default, a combo interface works in auto mode and automatically works as an optical or electrical interface.

  • GE electrical port: Ethernet cable
  • GE optical interface: optical module

The following optical modules are supported:

FE SFP&eSFP Optical Modules

GE eSFP Optical Modules

GPON&EPON Optical Modules

GE SFP Copper Modules

WAN interface: one 10GE optical interface LC/PC

The 10GE optical interfaces (1/10 Gbit/s auto-sensing) can work in GE mode and can transmit and receive service traffic at 1 Gbit/s or 10 Gbit/s.

  • Optical interface attributes: The optical interface attributes vary according to the optical module used.
  • Standards compliance: IEEE 802.3ae

Optical module

The following optical modules are supported:

GE eSFP Optical Modules

10GE SFP+ Optical Modules

GPON&EPON Optical Modules

GE SFP Copper Modules

USB 3.0 port (host) USB 3.0 Type A

A USB 3.0 interface provides up to 5 Gbit/s upload and download rates.

  • Standards compliance: USB 3.0 and USB 2.0
  • Working mode: Host
  • USB 2.0-compliant USB flash drive
  • USB 3.0-compliant USB flash drive
USB interface 2.0 (host) USB 2.0 Type A

A USB 2.0 interface provides up to 480 Mbit/s upload and download rates.

  • Standards compliance: USB 2.0
  • Working mode: Host

USB 2.0-compliant USB flash drive

Indicators

Figure 3-138 Indicators on the AR6121E

1. From top to bottom:

  • PWR indicator
  • SYS indicator
  • iNET indicator
  • CTRL indicator

2. GE electrical interface indicators (LAN)

3. GE electrical interface indicators (WAN)

4. GE optical interface indicator (LAN)

5. GE optical interface indicator (WAN)

6. 10GE optical interface indicator (WAN)

7. ACT (USB) indicator

-

-

Table 3-214 Indicators on the AR6121E
Silkscreen Name Color Status Description
PWR PWR indicator Green Steady on The device is powered by the built-in power module normally.
- Off The device is not powered on.
SYS SYS indicator Green Slow blinking The system is running properly.
Green Fast blinking The system is being powered on or restarted.
Red Steady on A fault that affects services has occurred. The fault cannot be rectified automatically and requires manual intervention.
- Off The system software is not running or is resetting.
iNET iNET indicator Green Steady on The network service has been established.
- Off The network service is unavailable.
CTRL CTRL indicator Green Steady on The device has been connected to the controller.
- Off The device is not connected to the controller.
- GE electrical interface indicators (LAN) Green Steady on A link has been established.
Green Off No link is established.
Yellow Blinking Data is being transmitted or received.
Yellow Off No data is being transmitted or received.
- GE electrical interface indicators (WAN) Green Steady on A link has been established.
Green Off No link is established.
Yellow Blinking Data is being transmitted or received.
Yellow Off No data is being transmitted or received.
- GE optical interface indicator (LAN) Green Steady on A link has been established.
Green Blinking Data is being transmitted or received.
- Off No link is established.
- GE optical interface indicator (WAN) Green Steady on A link has been established.
Green Blinking Data is being transmitted or received.
- Off No link is established.
- 10GE optical interface indicator (WAN) Green Steady on A link has been established.
Green Blinking Data is being transmitted or received.
- Off No link is established.
- ACT (USB) indicators Green Steady on The system has been upgraded or configured using a USB flash drive.
Green Blinking The system is being upgraded or configured using a USB flash drive.
Red Steady on The system fails to be upgraded or configured using a USB flash drive.
- Off No USB flash drive is connected, the USB interface has failed, or the indicator has failed.

Technical Specifications

Table 3-215 Technical specifications of the AR6121E
Item Specification
Installation type
  • Rack
  • Work bench
  • Against the wall
Dimensions without packaging (H x W x D) [mm(in.)]
  • Basic dimensions (excluding the parts protruding from the body): 44.4 mm x 442.0 mm x 220.4 mm (1.75 in. x 17.4 in. x 8.68 in.)
  • Maximum dimensions (the depth is the distance from ports on the front panel to the handle on the rear panel): 44.4 mm x 442.0 mm x 225.2 mm (1.75 in. x 17.4 in. x 8.87 in.)
Dimensions with packaging (H x W x D) [mm(in.)] 90 mm x 390 mm x 570 mm (3.54 in. x 15.35 in. x 22.44 in.)
Chassis height [U] 1 U
Weight with packaging [kg(lb)] 4.6 kg (10.12 lb)
Weight without packaging [kg(lb)] 3.2 kg (7.04 lb)
CPU 1.4 GHz, 4 Cores
Memory 4 GB
NAND Flash 1 GB
Console port RJ45
RTC Supported
Maximum power consumption [W] 33 W
Power supply mode AC built-in
Number of power modules 1
Rated input voltage [V] 100 V to 240 V, 50 Hz/60 Hz
Input voltage range [V] 90 V to 264 V, 47 Hz to 63 Hz
Maximum input current [A] 2 A
Maximum output power [W] 70 W
Type of fans Built-in
Number of fan modules 0
Heat dissipation mode Air cooling
Airflow direction Left to right
Extended slots (standard configuration) 2 x SIC
Number of service board slots 2
Redundant power supply Not supported
RPS input Not supported
PoE Not supported
Noise at normal temperature (acoustic power) [dB(A)] 52.3 dB(A)
Long-term operating temperature [°C(°F)]

0°C to 45°C (32°F to 113°F)

NOTE:

When the altitude is 1800 m-5000 m (5906 ft.-16404.2 ft.), the highest operating temperature reduces by 1°C (1.8°F) every time the altitude increases by 220 m (722 ft.).

Storage temperature [°C(°F)] -40°C to +70°C (-40°F to +158°F)
Long-term operating relative humidity [RH] 5% RH to 95% RH, non-condensing
Long-term operating altitude [m(ft.)] < 5000 m (16404.2 ft.)
MTBF [year] 30.05 year
MTTR [hour] 2 hour
Availability 0.9999924012

 

Formulario de contacto